Friday, 20 October 2017

ANTMINER D3 ,Monster miner

Bitmain just came out with the new Antiminer D3, Monster of a miner , which is available to pre-order and will ship on September 15th. The price for the this Monster in pre-sale is $2699 USD, and these are the specification of this miner:

1. Specifications of the Antminer D3 are as follows:
a) Hash rate: 15 GH/s (Variation of ±5% is expected)
b) Power consumption: 1200W (at the wall, with Bitmain’s APW3 PSU, 93% efficiency, 25°C ambient temp).
c) Dimensions of the miner: 320*130*190mm

d) Weight:5.5kg

2. Power consumption figures will vary with your PSU's efficiency, the ambient operating temperature and the accuracy of the power meter.

3. Bitmain recommends use of the APW3++ PSU with the Antminer D3. One APW3++ PSU can not power more than one Antminer D3.

4.The shipping for this batch is expected to start on a first-order-first-ship basis after 15 September for orders that Bitmain has received full payment for. As this is the first batch of the Antminer D3, there can be unexpected delays in shipment due to an unforeseen demand.

5. All PCIe connectors on a hashing board need to be connected to the PSU for the hashboard to operate. Do not connect more than one PSU to the same hashing board!

6. Separate power supply to control board: there is one additional 6pin PCIe connector on the IO board which must be connected to the PSU to get power. Be sure to power on the miner only after all the PCIE connectors are connected to power supply.

So if your question was, why the Dash hash was so high, 10TH/s? You got your answer .

Cream Team.

source: https://shop.bitmain.com

Creamcoin Marketcap

Cream chat